|
Ⅰ Corrugated panel facade system
 
· With typical smooth lines of sine wave, the appearance of a corrugated panel system has a special effect of complexity and exquisisity. The various kinds of installation - horizontal, vertical or diagonal - allow the panel to be matched with complex panel structures, meanwhile realizing clear hierarchy visual effect of the facade panels.
· The subtle visual effect of stagger spectacle in large area can produce a feeling of charm and liveliness.
· Chosen by customers and designers
· Commonly used widths: 836mm 778mm
· Commonly used thicknesses: 0.7mm 0.8mm
· Applicable grade: Water-proof layer is usually laid inside.
· Commonly used materials: Zn-Cu-Ti, TECU-copper, Al-Mg-Mn, stainless steel, prepainted (Al/Zn coating) steel sheet.
Ⅱ Trapezoidal panel facade system
 
· The angular design of the trapezoidal panel system can create a unique style in horizontal, vertical and diagonal structures. The solid contrasting effect of trapezoidal panel is stronger than corrugated panel under lamplight. Meanwhile, trapezoidal panel facade wall system can have two surfaces; either surface A or B can be selected as the visible side by you.
· Commonly used materials: Zn-Cu-Ti, TECU-copper, Al-Mg-Mn, stainless steel, prepainted (Al/Zn coating) steel sheet.
Ⅲ Shiplap panel facade system
 
· It is unique for shiplap panel system to have hierarchies and no shadow joints. The geometry profile of the shiplap panel, combined with the effects of light and shadow, can create a charming and clear contour.
· The panel can be tailor-made based on detailed design and determination of dimensions, guaranteeing optimum and economical on-spot installation.
· Standing seam height: 40mm
· Commonly used widths: 200mm 250mm 267mm
· Commonly used thicknesses: 0.8mm 1.0mm 1.2mm
· Commonly used materials: Zn-Cu-Ti, TECU-copper, Al-Mg-Mn, stainless steel, prepainted (Al/Zn coating) steel sheet.
IV Reveal panel facade system
 
· The advantage of reveal panel is the wide selection of axial sizes. The selection scope of panel and side joint is 200mm-300mm and the variable joint widths is 1mm-30mm.
· With flexible installation directions (horizontal, vertical and diagonal) and performance of different connecting widths, the reveal panel can provide architects with great space to realize their design ideas.
· Seam depth: 25mm
· Seam width: 1mm-30mm variable joint width
· Commonly used width: 200mm 300mm
· Commonly used thickness: 0.7mm 0.8mm 1.0mm
· Commonly used materials: Zn-Cu-Ti, TECU-copper, Al-Mg-Mn, stainless steel, prepainted (Al/Zn coating) steel sheet.
|
Products System > Facade system (3011)
Foshan Trump Building Material Co., Ltd.
All Rights Reserved!