|
I Structures for typical systems
II Characteristics of the system
1. With a long history and wide application, this maintenance system has a mature force-transferring structure, suitable for roofs or walls with ≥1.5°grade.
2. The system can be executed on spot as its construction is very easy, with a wide span (≤200m) of single panels usually without joints or screw holes. And, the lock seam is very stable.
3. Excellent drainage and anti-seepage performance with unique anti-heat-expansion performance as well as safe anti-wind-pressure performance.
4. With an advanced secondary molding technique (melon-peel technique and sector curve technique), this system can easily settle problems of single or double curved surface overlay.
5. High quality, low power-consumption, practical, good looking and environ
III General panel profiles
IV Standing seam roof system --Lock schematic diagram
V Special-shaped panels
 
 
 
 
VI Commonly used materials and thicknesses
|
Raw material |
Thickness |
|
Al-Mg-Mn alloy panel |
0.8mm、0.9mm、1.0mm、1.2mm |
|
Stainless steel panel |
0.4~0.7mm |
|
Copper alloy panel |
0.5~0.9mm |
|
Prepainted (Al/Zn coating )steel panel |
0.4~0.8mm |
VII Commonly used accessories
Specially designed and made according to projects' characteristics
VIII Flashing accessories
|
Products System > Standing seam system (7782)
Foshan Trump Building Material Co., Ltd.
All Rights Reserved!